|
1, main technical parameters and performance specifications:
1.1, cranes, gas terminal for the same brand, factory production, gas terminal of OEM, outsourcing third party brand goods. Provide written documents.
1.2, cranes with brand positive pressure principle dedicated anesthetic exhaust device, banning the use of negative pressure suction, directly provide anesthesia exhaust device structure graphic description file, prepare material for future reference.
1.3, the rubber material should be used in cranes internal gas hose, shall not use PVC material, prepare material for future reference.
1.4, cranes, bearing the basic dynamic load rating of 10000 kg or more; Basic rated static load or 60000 kg. Should be used in cranes bearing thrust needle roller bearing, the needle roller hardness or 60 HRC. Provide supporting documents.
1.5, cranes with high strength aluminum magnesium alloy materials, fully enclosed design of circular arc form, surface without acute Angle, no screws exposed. Material must be corrosion resistant, easy to clean. Suitable for medical clean environment.
1.6, cranes gas-electric separation design: cranes must have oxygen in the lower end of the box body of effusion hole design, guarantee the smooth oxygen accidental leakage discharge, and prevent the accumulation of oxygen in the tower and the power cord cause fire accident; Must provide photos or physical proof.
(provide documents required, gas terminal 1.7) :
(1) all gas terminal for the original products, brand with cranes. Gas plug with a positive check valve design, to prevent the reverse gas.
(2) all gas interface must take three status: communication, break, pull, plug socket plug can ensure more than 20000 times, with removable type positive maintenance.
(3) all kinds of gas outlet must be in accordance with ISO standard logo are different colors and different shapes, and have six ball type design, (six ball design pictures or physical proof), have mistakenly put prevention function.
(4) three sealing ring and shell design, make sure that the parts are detachable and can be positive maintenance. (provide physical structure of evidence).
(5) have ISO EN737 or DIN 13260 certification, the cranes on the supporting gas terminal and cranes for the same brand, by the original factory cranes manufacturer production.
2, bridge frame crane tower technical parameter requirements: a total of 2 units
2.1 posture cranes, bridge cranes main beam totally enclosed design of circular arc form, surface without acute Angle, no screws, cranes accurate positioning and the blue is not easy to drift.
2.2, high strength aluminium magnesium alloy material, metal fatigue strength is high, the load deformation for a long time.
2.3, bridge mounted cranes beam length is 2200 mm - 3500 - mm to choose from, finally according to the hospital actual site situation.
2.4, bridge mounted cranes all circuit, gas pipe in the bar, go through the tower body line hanging head. Need other through other bare pipe connected between the beams with hanging head.
2.5 posture cranes reading lamp lighting, bridge, built into beam cranes, cranes and equipment integration, save space.
2.6, bridge frame crane tower indirect lighting installation location within the beam in the direction of the ceiling, lighting up illuminate, does not affect the patient to rest at night.
2.7, bridge type crane tower dry wet area share, under the blue for the hanger type structure, on both sides of the derrick, the middle tray, connect fully, before and after the tray is located in the crane head directly, centre of gravity is strong, suitable for carrying all kinds of the size of the instrument. Can be along the beam horizontal move, equipped with the friction brake. Provide original factory official seal image text documents.
2.8 and bridge type crane tower tray and distance is adjustable, can be fixed on the two side derrick at any position, adjust the height on the derrick after there is no gap. The official seal image text documents provide manufacturer.
2.9, bridge frame under blue derrick crane tower for circular steel tube design, smooth surface, no gap. Can be any height on the derrick position installed double joint rotation stretch arms, tray and accessories. The official seal image text documents provide manufacturer.
2.10 frame crane, bridge crane frame rotation Angle 330 °, or cranes hanging head on both sides of the bed transverse distance running + / - 550 - mm.
2.11, bridge mounted cranes bearing load capacity 250 kg or more, under the blue hoisting capacity 150 kg or more.
2.12 requirement, configuration information:
1) blue with 2 devices under each tray, the second drawer tray with a push-pull type 1, a total of 3 sets;
2) Rotation stretch arm 2, double arms 300 mm + 300 mm long, 2 x 3;
3) the height is adjustable infusion rod 2, a total of 2 x 3;
4) din gas outlet (dry and wet area: oxygen x5, air x 3, negative pressure 5), a total of 13 x 3;
5) 12 Chinese system of power supply terminals, a total of 13 x 3;
6) network interface RJ45 2, a total of 2 x 3;
7) band and fixture ensure pipe, line orderly humanization device. |
